SAFE ENZYMATIC Bio-Remedial Cleaner & Degrease FleetKleen

Description

When this product is used in a routine maintenance program, it will effectively help to maintain a clean and safe environment while effectively and economically eliminating hazardous hydrocarbon pollution in the work place.
Cleaning and Degreasing of;
driveways,
concrete floors,
metal grating,
cement
most solid surfaces.
This product utilizes Bio-Remedial technology to literally “eat” grease, oil, and hydrocarbons off any hard surface.
This process uses naturally occurring, harmless micro-organisms with specially formulated bio-surfactants to degrade these hydrocarbons.
Contains no solvents and is non-flammable, it is non-toxic, non-hazardous, non-corrosive and non-caustic.
FleetKleen™ is a highly concentrated liquid. Whichever procedure you decide to   follow, you must mix this product at a minimum ratio of 15 parts water to 1 part in order for this product to work effectively. You may add more water, if necessary, for economy or as your application may dictate.
FleetKleen™ is a new concept in the cleaning and degreasing of driveways, concrete floors, metal grating, cement and most solid surfaces.
This product utilizes Bio-Remedial technology to literally “eat” grease, oil, and hydrocarbons off any hard surface.
This process uses naturally occurring, harmless micro-organisms with specially formulated bio-surfactants to degrade these hydrocarbons.
FleetKleen™ contains no solvents and is non-flammable. It is non-toxic, non-hazardous, non-corrosive and non-caustic.
PRESSURE WASHER PROCEDURE:
1. Insert the mixing tube of the pressure washer directly into the spout of the container.
2. This product must be mixed at a minimum of 15 parts water to 1 part FleetKleen™.
3. Adjust concentration levels as appropriate.
4. Apply the mixture directly on the area you wish to clean and degrease.
5. Use the “pressure” to aerate and agitate the “stubborn” areas.
6. Allow the area to remain wet for as long as possible.
7. Very old stains may need several applications.
MANUAL SPRAYER & BRUSH PROCEDURE:
1. Pre-mix FleetKleen™in an industrial sprayer at an appropriate concentration level.
2. This product must be mixed at a minimum of 15 parts water to 1 partFleetKleen™.
3. Spray the stained area with the mixture, Be sure to cover the area to be cleaned.
4. Wait a few minutes before going to next step.
5. Agitate and aerate the area with a stiff brush or broom.
6. Allow the area to remain wet for as long as possible.
7. Very old stains may need several applications
*** Additional shipping charges apply outside the Lower 48 states.